The principle of operation of the cruise control and instructions for use. How does cruise control work with a manual transmission? & Nbsp Do I need cruise control in a car

Mechanical cruise control is a system used to maintain a set speed. The system monitors the speed mode in the car when it is forced to frequently move on the highway or if the driver lives in a country house.

Getting to know your device

Cruise control on mechanics has its main purpose to save gasoline and other types of existing fuel. The system is designed for use on premium vehicles. After all, the process of movement occurs in such a way that the driver constantly has to change the speed level, increasing and slowing it down. Then he is guided by the speedometer. These fluctuations in speed provide uneven fuel consumption and constant driver distraction.

System advantages

Statistics show that the use of cruise control on the mechanics allows you to save fuel on average within 12%.

In addition, the observance of a constant level of speed allows you to protect the parts and mechanisms of the vehicle from rapid wear, save consumable fluids. Experts carried out the necessary calculations and found that it is possible to achieve a reduction in financial costs within 2%. Thanks to the use of modern cruise control systems on the mechanics, many additional options can be obtained. Including scanning the free space that opens in front of the car. This way the driver can find out if there are any unexpected obstacles on his way.

The indicator of the lower speed limit is equal to a number from 30 to 50 km / h. The level of the upper speed limit will depend on who the vehicle manufacturer is. Typically, the performance of such a system varies from 200 to 220 km / h. At a low level of travel speed, for example, if there is a traffic jam, the driver will only need to steer using the steering wheel. And the function of the system in this case will be to automatically increase and decrease the speed of movement by adjusting the brake pedals and the throttle stick.

Description of the cruise control scheme

For example, take the new Lada, which does not provide for a mechanical cruise control system.

The following components of the structure will control the speed of movement:

• The control module or control unit is a kind of computer microprocessor located in the motor compartment.
• Electric or pneumatic throttle actuator. It depends on what type of fuel supply system is used. This drive and throttle assembly are mated together.
• A switch is a device that has an exit to the steering wheel, center console or the area where the control panel is located. The purpose of the above switch is to activate and deactivate the system.
• Types of controllers. The different number of sensors in this system is explained by the fact that everything depends on the manufacturer and brand. Both high-speed rotation of the wheel and control of the speed of the rotating wheels and the throttle element can be provided.

If a cruise control system is installed in the new Lada, then the unit will be integrated into the system responsible for controlling a certain vehicle.

Features of work

Installing cruise control on a mechanic is considered unrealistic for many motorists. But with a detailed study of the issue, you can find out that such an installation can be performed even with your own hands. The main thing is to think over the expediency of such an action. Indeed, in addition to the advantages listed above, the cruise control system also has some disadvantages. They will be discussed later.

This feature is intended for automation and is used in most premium models. This is the advantage of having an automatic transmission. You can install the system using the regular mode. Installation is straightforward as it only involves using the space provided by the vehicle manufacturer.

Cruise control can be successfully installed on Lada-Vesta if you use a universal device for this purpose.

Do-it-yourself cruise control on mechanics can be installed. This will help the advice given by professionals. As mentioned above, a universal device is used for mechanics. It is desirable that it be German, since it is these systems that are of high quality and, according to consumer reviews, are quite reliable. Choosing a quality cruise control system is a guarantee of protection against malfunctions and breakdowns, which can be caused by overload. Overload is caused by incomplete compatibility of the vehicle and the universal cruise control system.

Installation features

To successfully connect the multifunction steering wheel on Lada-West, you will need to additionally install a bracket and an accelerator cable. This will provide the ability to control the vehicle speed level. Installing the cruise control also requires installing a button that will operate the device. It is located under the deflector. Knowledge of these features is essential to a successful installation.

How to connect the system if the manufacturer did not provide for it

First of all, you first need to make sure how good the car components are. Good rubber must be fitted. If these conditions are not met, the machine cannot be automatically controlled. If all systems are in good working order, the driver will ensure his safety.

It is important to pay attention to the presence of a sensor that monitors the position of the accelerator pedal. If you have one, you will need to purchase an additional bracket. You can also install it yourself.

Steps to install the cruise control system

It will take an hour to complete the work. Then it is also necessary to check the operation of the system, to eliminate the existing problems. The sequence of work is as follows:

• Choose a place where the system will be located. Typically this is a fuel filter, but a brake hose can also be used.
• We connect the second cable and the accelerator. Before cutting it off, it is necessary to install a sensor that controls how the gas pedal is located. The other end is to connect the cable to the cruise control device.
• Find the wire that connects to the tachometer and connect it to the new device. This wire is also connected to a green wire extending from the control unit. The red wire is connected to the brake light system.
• A button is installed that is responsible for activating and deactivating the cruise control system. Here they use a gray double wire. Pulling the mass from the black wire is mandatory.
• Since the steering wheel is required to install the system control handle, you will need to disassemble it. If airbags are present, they will need to be temporarily removed. After installing the handle, the handlebar is assembled.
• The health of the system is checked. To activate the cruise control, just press the button on the device.

Let's sum up

The article considered the question of whether it is possible to install cruise control on the mechanics. By its principle, this function is reduced to the ability to automatically maintain the speed level that was previously set by the driver. And you don't need to use the gas pedal.

To activate the cruise control system, the driver only has to press a button on the device. You can immediately feel the capabilities of the system and use it to the fullest.

After pressing the button, it is important not to touch the gas pedal with your foot. This ensures a smooth vehicle speed. It will not change even due to uneven road terrain.

In this case, the driver can use the pedal if he is going to overtake or wants to stop driving.

Modern systems have two buttons: on / off and SET. In the case of double pressing of the latter, you can develop the maximum permissible speed.

But it is also important to note that the installation of such a system is advisable only for driving on country roads that are not overloaded with other cars. For city driving, installing the system is meaningless. After all, the driver still needs to constantly use the pedal to brake.

The tips for installing the cruise control system on the Lada mechanics suggested in the article will help the car enthusiast to successfully cope with this task on his own.

In the car. Meanwhile, this is an old system, which previously could only maintain the speed of the car, and the driver did not have to hold the gas pedal. This system provided additional convenience and comfort when driving on highways and highways. As a result of using cruise control, the driver is less tired while driving. Also, in theory, this helps to reduce fuel consumption, since the engine runs evenly when using the system, and its rpm does not jump.

What is cruise control for in a car?

This system is needed to provide additional convenience when traveling long distances. For example, if a driver needs to get from one city to another, having covered 500-600 kilometers, then by car without this system he will have to hold the gas pedal for 5-6 hours (depending on the speed of movement), which is actually equal to holding the right foot in an uncomfortable position. During the entire travel time, you want to change the position of your leg, but you cannot do this. It seems that this is a trifle, but keeping the gas pedal for 5-6 hours is actually very difficult.

By activating the cruise control function in the car, the driver can afford to release the accelerator pedal. The system will supply fuel to the combustion chambers not through the gas pedal, but through special pneumatic drives. The driver will be able to adjust the speed of movement using the buttons that are located on the steering wheel (usually there are 5 buttons).

System management

Now that we understand what it is - cruise control in a car, we can figure out how it works. Usually there are 5 buttons on the steering wheel to control this system:

1. On / Off button that activates and deactivates the system.
2. Switch for fixing the speed mode and increasing the speed. That is, after accelerating to the required speed, the driver can fix the current speed with a switch and release the accelerator pedal. Subsequent pressing of this button will increase the driving speed by 1 km per hour.
3. If, while using the cruise control, the driver had to quickly accelerate or brake by pressing the gas or brake pedal, then the parameters of this system are reset. To quickly activate cruise control and return to the previously set speed, the driver needs to press the Resume button.
4. Coast speed reduction button. Each press of the button decreases the driving speed by 1 km. In some models, the step of decreasing and adding speed is 1.5 km.
5. The Cancel button deactivates the system.

Depending on the car model, this system can be represented by other buttons, the step of accelerating and decelerating may differ. But the principle looks exactly as described above.

Kinds

There are several types of cruise control in the car. What does passive or active type mean? In the first case, the driver can only set the vehicle speed. However, the second type involves the use of complex electronic devices that scan the space in front of the car, which opens up additional possibilities for controlling the vehicle depending on the traffic conditions.

Passive type (PPC)

As we have already found out, passive cruise control allows you to maintain a given speed, which is convenient for long trips over long distances. Due to the constant high-speed operation of the engine, fuel economy is provided.

The control is deactivated when the driver is slightly pressed on the gas pedal. The design of such a system has a special pneumatic actuator that regulates the flow of the air-fuel mixture into the combustion chamber through the throttle valve. This eliminates the need to use the gas pedal.

Active (or adaptive) type

Adaptive cruise control is an improved version of the active type. In addition to the ability to maintain the speed limit without pressing the gas pedal, cars with adaptive cruise control can calculate the distance to the vehicle in front, and also reduce or increase speed depending on the situation on the road. That is, if the system determines that the distance to the vehicle in front is decreasing, then the system also slows down. The deceleration is carried out until the time between the cars, in the opinion of the system, becomes optimal. If the sensor stops seeing an obstacle ahead, then the car picks up speed and keeps this speed limit.

Safety

The adaptive setting of cruise control on the car is quite smart, it provides not only comfort when driving on highways and highways, but also the safety of the driver who can relax too much on the road.

In addition, this system can produce not only emergency braking, but also evasive maneuvers. This greatly increases safety while driving, and often such systems preserve the lives of people and the integrity of the vehicle itself in various situations on the road.

Note that adaptive (or active) cruise control is closely related to the operation of ABS and ESP systems (stabilization and anti-towing systems), and if at least one of them stops working, then cruise control cannot be activated either.

Dynamic type

In addition to adaptive and passive cruise control, there is also a dynamic one. It is one of the varieties of the passive type. A feature of this system is the control of engine operation, which saves fuel and engine resource.

For example, when climbing a hill, the system slows down and slows down, which protects the motor from unnecessary loads. Also, the speed is reduced in case of any problems with the engine and when the car enters corners. After cornering, the previous speed is restored.

Now we figured out what it is - cruise control in a car. Let's define its main advantages and disadvantages.

pros

The benefits of this system are obvious to every driver. First of all, this is convenience when driving and reducing the stress on the back due to the absence of the need to keep your foot on the gas pedal. Some drivers cite fuel economy as a virtue of this system. In theory, savings are achieved by ensuring the uniformity of the engine and the absence of drops in fuel injection. In addition, if adaptive cruise control is installed, then it also provides additional vehicle safety.

disadvantages

The main disadvantage is the high cost of the system. Cars with cruise control systems are expensive and out of reach for most consumers. However, cars with conventional passive systems are already available to the middle class of consumers.

If you believe the reviews of some drivers who actively use this system, fuel economy is completely absent, and in some cases there is even increased consumption. Another serious drawback is the unsafe use of the system due to the fact that the driver can relax too much while driving the car. Constantly keeping your foot on the gas pedal, you will not be able to relax much.

The next disadvantage is the inability to use the system on roads with frequent descents and turns, as well as on highways with heavy traffic. There is no need to talk about using the system in the city at all.

Many drivers do not recommend using this system on the road after or during rain, as the driver needs to feel the car when braking. Otherwise, it may lead to an accident. This system is suitable only for those drivers who often travel from city to city. In city traffic, the function is practically useless, since there are no long sections of the route in the city where it would be possible to keep a stable speed for a long time.

Conclusion

Now we finally understand what it is in a car - cruise control. Such a system is really useful and necessary - it should be in every car. Gradually, such systems appear in cars of the middle and even budget class, but so far these are just passive varieties. In addition, this system can be installed even on a car in which this technology is not provided by the manufacturer. Special installations are sold at car dealerships.

You can put an end to this. We figured out what it is - cruise control in a car. The technology is useful in some cases, but you shouldn't get carried away with it, since the driver must not lose concentration on the road.

A modern car is not as simple as it might seem at first glance. An incredible number of various electronic assistants, complex systems and options allow you to multiply the comfort of driving your iron horse and save the driver's strength and nerves. Today we will talk about such an irreplaceable assistant as cruise control, and its specifics with manual transmission.

General information

To understand how the cruise control works on a manual transmission, you should familiarize yourself in more detail with the features of its operation and at least approximately know the structure of such complex electronics.

Cruise control is designed to maintain a constant vehicle speed without driver intervention.

In other words, the driver does not have to pull his foot to the pedals once again to adjust the speed and constantly make sure that the car does not lose speed on the track.

Many people claim that cruise control, as such, is a useless system and not so necessary on modern cars. The main argument in such a controversy is that many cars in the recent past a priori did not have such an option even in maximum trim levels, and only a certain and rather narrow range of premium models were equipped with the coveted set of keys on the steering column lever.

However, in a certain number of cases, it will be so easy to do without this option. To understand whether it makes sense to purchase a package of options that includes cruise control, it is worth understanding where the car most often moves.

If the car spends most of the time in the city, jostling in traffic jams and driving at variable speed, there is no point in cruise control. Otherwise, you will have to constantly "play" with the controls and thus constantly load the already sensitive and expensive electronics.

Things are quite different if the driver constantly needs to move along the highway, away from cities. For example, driving for a long time on a flat, straight road requires constant effort on the accelerator pedal. If the driver constantly keeps his leg in the same position, it will quickly get tired and numb. To prevent this from happening, you just need to activate the desired button, and the leg can be immediately released.

Instructions for use

As you know, cruise control is the prerogative of a car that works with an automatic transmission. Indeed, in a car with an “automatic” it will be much easier to operate with cruise control - just press the gas pedal, accelerate your car to the required speed and fix the speed limit using a button on the steering column lever or the dashboard.

However, as surprising as it may sound, there are a number of manual transmission models on the market, where cruise control also works. On the mechanics, such a system has several features that are expressed in the nuances of its use while traveling.

How do you use cruise control? How does it work, and what do you need to know about such systems? Let's figure it out.

Typically, the cruise control control panel is located on the steering column lever, which, in combination, controls the lighting or wiper blades. The main controls are two switches with a two-way operating principle. They can be tilted left or right, depending on what needs to be activated.

The first switch is the cruise control lever. It should be moved from one extreme position to another, the system is activated and will be ready to work in a given mode. Immediately on the car's on-board computer, the corresponding indicator lights up, and on the dashboard - an icon depicting a speedometer with a limited scale. Often it is possible with the same key to reset the steady-state speed readings and deactivate the system.

Another switch is the adjustment of the operating mode and the key to fix the current speed. So, on cars with manual transmission, you must select the desired gear, accelerate the car and press the lock button. The current speed will be displayed on the dashboard and the car will maintain it automatically without the driver's assistance.

If for some reason it is necessary to adjust the speed, and the cruise control is already activated, then there is no need to reset the current readings and accelerate or brake the car yourself. It is enough to move up or down the switch responsible for fixing the current speed. In this case, on the dashboard, the value of the fixed speed will change up or down, and the car will instantly accelerate to the set value.

Long driving trips can be tiring for drivers. Monotonous position of the legs can lead to muscle pains and sometimes cramps. To reduce the strain on the legs and give the opportunity to rest from the pedals, you can use the popular option - cruise control.

Car manufacturers mainly provide their cars with this system when equipped with automatic transmissions. However, it is not uncommon for you to find cruise control on the mechanics, which gives the driver, you will learn from the article.

The system automatically participates in providing the car with a constant speed while driving. The set speed is maintained until the driver switches it off on his own. This mode is most popular outside the city, since on this section of the road it is possible to make longer journeys at a constant speed.

Before using the cruise control, you need to know that it has several levels of dependence on the car's on-board computer. When it is working, other systems, such as ESP or ABS, must be in good condition.

The mode is activated using a paddle paddle or buttons on the multifunction steering wheel. To start, just use the "on / off" button. On certain sections of the road, the driver, without leaving the cruise control mode, has the ability to add gas without pressing the accelerator pedal with his foot. This function is also carried out using a lever or buttons on the steering wheel.

To add speed, the driver presses the button or lever with the "+" sign, the speed reduction is done in the opposite direction to the "-" sign.

You need to know that if the driver presses the brake or gas pedal while the cruise mode is on, the system will automatically switch to manual control, disabling the cruise control.

Information content is provided by a special indicator light on the car dashboard. If the lamp with the corresponding image is on, the cruise control is on.

Using the levers of the system, it is possible to set the desired vehicle speed. It is entered into the memory of the car computer. Leaving this mode, and then entering again, the driver activates the last recorded speed of the car.

Multi-wheel with cruise control

As a rule, moving the lever towards "plus" or "minus" adds a speed of 1-2 km / h to the car. The minimum possible speed for setting the mode on a cruise is 30 km / h.

If necessary, you can exit the mode by pressing the “on / off” button again. After that, the corresponding indicator on the panel should go out.

Mechanics and cruise

Most often, cars with an automatic transmission are equipped with such a function, although you can independently put cruise control on the mechanics if this option is not provided by the automaker. In this case, you will have to switch gears yourself.

A specialized company will also help you to carry out tuning for the installation of the cruise. Some organizations have universal systems prepared for installation. Self-purchase of electrical equipment is also allowed. In this case, the car owner selects the most comfortable option for his vehicle, taking into account ergonomic features.

Let us explain how the cruise control works on the mechanics, because there is some difference from working on the “automatic”. Pressing the clutch or brake pedal automatically disengages. The driver must shift the transmission to the desired gear and then restart cruise control if necessary. Also, shutdown is performed when the ignition is turned off, as well as resetting the speed settings.

Self-installation of cruise control

Installation is carried out on the steering wheel. For this, a three-position button or lever is installed to provide control. They make it possible to customize the system, while you need free access to work with them. An on / off element is also mounted.

Cruise control kit

All wires are hidden under the casing and lead to the electronic control unit. Signals are supplied for operation with the throttle valve. This can only be done on machines equipped with an electronically controlled damper. The installation procedure takes 1-1.5 hours.

In some cases, problems with the central locking are possible side complications. However, there is no key adaptation. To resume this function, you will need to contact the official service, since the issue cannot be resolved on your own.

Adaptive cruise control system

The most progressive cruise control service is its adaptive version. It allows you to control the speed limit of the vehicle in front, and based on the data obtained, the speed parameters of your own car are adjusted. Such services are usually called active, in contrast to the classic passive.

Adaptive cruise control

The ability to maintain a safe speed limit and sufficient spacing between the front car is ensured by built-in small radars and an additional digital signal processor.

The modern service is capable of operating at speeds of 30-200 km / h. They are already equipped with some models of the middle class and the premium segment. In some cases, similar systems monitor not only the nearest vehicle, but also taking into account the road markings, ensuring movement in the required lane.

When the approach begins with the front car, a signal is sent to the driver about a change in road conditions. Such actions help to quickly respond to a possible obstacle. More advanced cruise controls independently perform maneuvers with braking or other action on the car. Such services provide drivers and passengers with increased safety conditions.

Conclusion

In the presence of cruise control, it is easier for the driver to control the car, both with an automatic transmission and with "mechanics". You can install this system yourself if you have an electronic control unit. Advanced cruise control improves road safety.

For many, cruise control on mechanics may seem like something fantastic, but if you try, you can install such an additional function on your own car. The only thing to think about right away is whether or not you need cruise control on your car? After all, although in general this additional function greatly facilitates the process of driving a car, it also has its drawbacks.

Is it possible to install cruise control on the mechanics: we deal with the technical nuances. Will the cruise control work fully on the manual transmission? The process of connecting the cruise control to the mechanics when it is not provided by the manufacturer. What you need for installation Installation process Is it worth using cruise control on a car: advantages and disadvantages of the function.

Is it possible to install cruise control on the mechanics: we deal with the technical nuances.

Those car enthusiasts who are wondering if there is cruise control on the mechanics most likely met this function only on cars with an automatic transmission. Indeed, this additional function is mainly used only on cars with automatic transmission, on which it is possible to install it in normal mode.

In this case, the procedure for connecting the device will not be practically difficult, since the car owner will only have to install it in the place provided by the manufacturer for this.

As for cars running on a manual transmission and on which the possibility of installing cruise control was not provided, then a universal device can be manually installed on them.

IMPORTANT! When buying a cruise control for a car with a manual transmission, give preference to German manufacturers, whose devices are highly reliable. This will allow you to avoid unexpected breakdowns of the cruise control from overloads that may arise due to incomplete compatibility with the car.

Technically, a similar procedure involves the additional installation of a bracket and an additional cable to the accelerator pedal, with the help of which it will be possible to control the speed of the car. Cruise control on the mechanics also provides for the installation of a device control button at the bottom of the deflector.

However, often, this button turns off after each pressing of the pedal (for example, when overtaking), which is why the cruise control has to be activated again.

Will the manual transmission cruise control work fully?

The operation of the cruise control on the mechanics is practically no different from its operation when installed on a car with an automatic transmission.

However, in this case, there may also be one drawback: when trying to go uphill with cruise control on, the driver will not be able to automatically downshift.

Because of this, if the driver rides in the 5th gear of the manual transmission, then without additional pressing the gas pedal, he is unlikely to be able to completely overcome the entire rise.

In such a situation, another feature of the cruise control manifests itself - if the speed of the car decreases (which happens when it is impossible to go up the slope), the device is automatically turned off at 40 km / h, so the driver will have to resort to mechanical control of the gas pedal in any case.

IT IS IMPORTANT! If the cruise control has a RES button, the speed can be reset by double-pressing it. In its absence, a decrease in speed can be achieved by pressing the gas pedal and fixing a new speed using the cruise control start button.

The process of connecting the cruise control to the mechanics when it is not provided by the manufacturer.

Before proceeding with the installation of the cruise control, the car owner must make sure that all the technical units of his "iron horse" are in good working order, and also install good tires on the car. This is due to the fact that in the presence of such malfunctions, it is very dangerous to allow the car to drive under automatic control. If everything is in order, the driver will not endanger himself by driving on the cruise control.

What you need to install

To complete the work, it is important to prepare in advance:

curly screwdriver;

scissors or an awl (the main thing is that they are very sharp);

nut head;

wrench;

a set of self-tapping screws (you can also use screws);

cable for connecting to the accelerator (it can also come with the device);

universal cruise control.

IMPORTANT! If your car has an accelerator pedal position sensor, then you will need to purchase an additional bracket for it, which you will also have to wear yourself.

Installation process

In general, all the work on installing the cruise control on the mechanics will take you no more than an hour, however, you should allocate time for checking the operation, as well as eliminating possible malfunctions. In general, the work consists of the following sequential actions:

Choosing a place for a new device. Often, motorists attach it near the fuel filter, which also allows the cruise control to be connected to the brake hose. You can choose another place for it, the main thing is that it is dry, and you can freely bring the cable from the accelerator to it (if there are strong bends in the cable, you will not be able to control the speed).

IMPORTANT! If you cannot run the cable from the accelerator in such a way that there are no bends on it, you can use a regular fishing reel, along which it will bend freely, while not breaking or damaging other mechanisms of the car.

We connect the second cable to the accelerator, but do not rush to cut it. First, install the bracket on the gas pedal position control sensor, and only then measure the required length of the cable and cut it off. The other end of the cable can then be connected to the cruise control device.

To connect the cruise control to the car, you must first find the tachometer connection wires, to which you need to connect a new device. The tachometer wire must be connected to the green wire that comes from the cruise control unit. The red wire of the device is intended for connection to brake lights.

Installing the cruise control activation / deactivation button. To connect it, we connect a gray double wire. For full operation of the button and the device, be sure to stretch the mass that goes along the black wire.

The cruise control handle must be installed on the steering wheel of the car, for which it will have to be disassembled. If your car has airbags, they will also have to be removed for a while. We install the handle on the steering wheel and assemble it back, not forgetting about the airbags.

We check the operation of the cruise control. To do this, we recommend that you drive along an empty road where there is no traffic. It is rational to do a trial activation of the device at a low speed (but above 40 km / h), while being ready for the need to control the accelerator pedal if the device suddenly does not work.

Is it worth using cruise control on a car: advantages and disadvantages of the function.

The principle of operation of the cruise control function is that the system of the device automatically maintains the speed set by the driver, without requiring mechanical action of the foot on the gas pedal.

To activate the cruise control, the driver just needs to press a button on the device, and immediately after that he will be able to take his foot off the pedal and enjoy the smooth speed of the car, which will not change even when the road surface changes.

But this does not mean that the driver cannot use the pedals when overtaking or stopping is necessary. All this is quite possible, and even more - after a forced acceleration or braking, the car will still return to the same speed that was set on the cruise control.

IT IS INTERESTING! Modern cruise control systems are equipped with more than one on / off function button. In addition to it, the SET button can be installed, a pair pressing of which will allow the driver to double the speed of the car as quickly as possible, without touching the gas pedal with his foot.

In general, the advantages of this additional function on a car with a manual transmission include the ability to relieve stress from the leg during a long trip that does not require dynamic vehicle control. Thus, driving on a long and unloaded track, the driver really gets a chance to rest.

However, the rationality of the cruise control on the mechanics is only if the car owner constantly travels out of town on unloaded roads. In urban conditions, there is practically no point in installing cruise control, since the driver will constantly press the pedals with his feet.

We hope you were able to answer the question for yourself whether it is worth installing this additional function on your car, and you will be able to clearly explain to others what cruise control is on the mechanics and how to install it.