DIY controlled fish feeder. Fish feeder in an aquarium. Original idea with a phone

Do not forget that aquarium fish are just as much pets as dogs and cats. Like other pets, fish should have their own place for feeding. Inexperienced aquarists are sure that the inhabitants of an artificial reservoir do not care how and where they eat food. But, if you consider feeding through a feeder, it becomes clear that this method has many advantages. So, the fish get used to the place and time of feeding. Creating a routine has a beneficial effect on the health of the inhabitants.

What is the use of feeders?

A fish feeder is a kind of discipline. Feeding will be associated with only one location. Thanks to this, you can improve the condition of the water in the aquarium, since the residues will settle in only one place, which allows them to be removed from the aquarium or collected by catfish. The catfish will not have to scour the entire ground in search of food; it will know exactly where to look for the treasured delicacy. The minimal distribution of food in the aquarium prevents rotting processes, which means the water stays clean longer.

A feeder for live food greatly simplifies the feeding process. The fact is that particles of such food are heavier than water and quickly sink down, so slow fish or those who do not know how to feed from the bottom do not have time to fully enjoy live food. Thanks to a properly selected feeder, particles are retained in it, which will allow the fish to slowly eat all the food offered.

Variety of models

Today in the pet store you can find a huge assortment of different aquarium feeders. But if you don’t want to spend money, you can build a simple structure yourself. All models can be divided into floating and automatic.

If you decide to purchase a floating option, then it is more convenient to purchase a model with suction cups. Such feeders are attached to the wall, which will not allow the fish to move it and the pump to be carried away. Most often there are plastic frames with food poured into the middle. But if you don’t yet know where the power supply will be located, then you can choose a regular model without fasteners.

Pay attention to live food feeders. In appearance, it looks like a cone, at the sharp end of which there is a mesh. The cone is conveniently located under water, so changing the height of the water will not affect convenience in any way. All the worms remain in the cone until the fish grabs them on its own. If you remove the grid from the bottom, you can use it as a regular feeder for different types of food. A fixed feeder on one of the walls of the aquarium is also inconvenient due to the natural lowering of the water level. If the aquarium feeder is fixed on one side, then after changing the level, the feeder will tilt and stop performing its functions. Manufacturers have thought about this, so you can find modern floating models with guides that help it adjust to the water level.

People who:

• Often go on business trips or travel;
• Contains a large number of aquariums.

The automatic fish feeder is mounted on the upper edge of the side wall. It is a can with an engine. The timer sets the time when the food will be delivered to the pets. As soon as the appointed time approaches, the box automatically throws out the portion. Since the amount of food varies depending on the type and number of inhabitants, the feeder is equipped with a quantity regulator. To begin with, you will have to spend a lot of time to adjust the optimal amount. Remember that in no case should the food settle to the bottom and rot, no matter how hungry the fish may look, it is worth limiting their diet.

An automatic feeder is ideal as the main source of food, but you shouldn’t leave things to chance. After all, it can only dose dry food, and fish need a balanced diet. Give your fish live or plant food.

The feeder must be installed in the opposite direction from the filter and compressor. If you place it in the same corner, then the flow of water will simply wash the food out of the feeder. So, the fish will remain hungry, and the food will spread out in all directions.

How to make a feeder yourself?

Not everyone wants to buy a feeder, since you can make it yourself. To make it you can use:

• Plastic,
• Foam plastic,
• rubber tube,
• Plexiglas.

The easiest way to make a feeder is from foam plastic. Even a child can cope with this task. Find a small piece of foam that will be 1 to 1.5 centimeters high. Decide on the optimal length and width of the feeding area and cut out a frame from foam plastic. It is advisable to go over the edges with fine sandpaper to remove excess. This feeder has significant advantages: excellent buoyancy, ease of construction and low cost. However, there are some drawbacks - a short-lived design that easily absorbs odor and dirt.

Making a feeder from a rubber tube is even easier. It is enough to find a suitable tube with a diameter of 1 centimeter and glue the hollow ends together. It is important to do this very carefully, because if water gets into it, the ring will sink. This feeder is not afraid of mechanical damage and will last a long time.

For live food, it is better to use plastic and plexiglass. Take a piece of material up to 2 mm high. Make a frame from four strips, gluing them perpendicular to each other. Place a piece of plastic with drilled holes in the middle and glue it securely to the prepared frame.

Of course, the aesthetic side of homemade feeders remains in question. In addition, their cost in pet stores is not so high that you waste time on independently preparing the necessary attribute.

Aquarium fish create coziness in the home. They are considered to be the easiest pets to care for. Therefore, fish are usually owned by those who are away from home all day and often go away for a long time. It seems to them that the fish will not suffer in the absence of the owner. But in fact, these pets require the same attention and care as everyone else. And in addition to maintaining the right atmosphere for them in the aquarium, it is very important that they are fed regularly. Therefore, travel lovers are faced with the following problem: how to feed the fish in their absence? The best solution in this case would be an automatic aquarium feeder. You can buy it at a pet store or at the market, then it will provide a normal diet for your pets for a long time. If the owner of the fish leaves for a short time, you can make such a device yourself.

What is an automatic feeder for an aquarium?

In order for the fish to feel good, be active and beautiful, they need to be fed regularly. But what if sometimes this is not possible? This happens if the owner leaves for several days - on vacation or to the country, in offices and organizations that are closed on weekends or holidays.

In these cases it can be used in an aquarium. These are devices that dose out a portion of food at a specially designated time. They are intended for feeding adult fish with dry food. Such feeders are attached to the wall or lid of the aquarium, and are powered by mains or AA batteries.

Automatic feeder device

All such aquarium devices have the same operating principle. It consists in the fact that at a certain time a certain amount of food is poured out of the container into the aquarium. Different automatic feeders may differ in the presence of various additional functions, such as a digital display or a fan.

1. Feeders with a rotating container are most often used. The principle of their operation is that when the drum is turned, a certain amount of feed pours out through a hole in the container.

2. Disc feeders have a simpler device. In them, the container is divided into a certain number of compartments, which are sequentially emptied when the disk rotates.

3. The most expensive is an electronic automatic feeder for an aquarium. In it, using a given program, a plug is opened at a certain time, and part of the feed spills out.

Disadvantages of such devices

1. They are designed to serve dry food only. You cannot feed your fish with live or frozen food through such devices. Therefore, long-term feeding in this way can lead to a lack of nutrients and illnesses in your pets.

2. You cannot feed fry using automatic feeders. They require a special diet and diet.

3. Another disadvantage is that an automatic feeder for an aquarium is very expensive. Its price ranges from 1.5 to 7 thousand rubles.

The most common automatic feeders

1. One of the most popular now is Hydor. Its advantages include a convenient digital display, 10 different feeding options and two or three meals a day.

2. Eheim also produces popular models of automatic feeders. They feature a convenient rotating feed hopper, a built-in fan to prevent feed spoilage and a variety of feeding modes.

3. One of the cheapest is a feeder from Juwel. Its feature is ease of use, the ability to install anywhere in the aquarium and two-time supply of food.

4. Hagen is the smallest automatic aquarium feeder. You can use even very small food in it, although it only holds 14 grams.

How to use automatic feeders correctly

The mechanism of their action is simple. For the feeder to work, you need:

Pour dry food in the form of granules, flakes or tablets into the container;

Program the feeder for one or two feedings per day;

Adjust the amount of feed poured out;

Attach the feeder to the aquarium and turn it on.

Typically, such devices have convenient fastenings and are powered by AA batteries. If the automatic feeder for an aquarium is plugged into the network, this may be inconvenient during long-term use, since possible voltage fluctuations can throw off the settings. Therefore, in this case it must be connected to the battery. In order for automatic feeders to serve for a long time and correctly, it is necessary to clean them regularly and do not forget to change the batteries.

Do-it-yourself automatic feeder for an aquarium

The design of such devices is very simple, but their prices are quite high. That's why many aquarists make them themselves. The disadvantages of homemade automatic feeders include the inability to regulate feed portions and feeding mode.

1. The most complex design is accessible only to a craftsman who understands electronics. To make it you need a motor with a gearbox. The shaft should rotate at low speed. You can take parts from children's toys or use two timers. A plastic container with a lid is attached to the shaft. On one edge you need to cut a long narrow slit. Some of the food will spill out through it when the container is turned.

2. Anyone can make a simpler device. To do this, you need an alarm clock with a thick hour hand and a small, lightweight plastic container with a screw-on lid. A hole is cut in it for pouring out food.

The box is attached to the hour hand of the clock. And twice a day the hole appears at the bottom. To prevent a lot of food from spilling into it at once, you can glue a partition inside or pass a small tube into it.

3. The most interesting disposable automatic feeder is very simple to make. You need to take a plastic bottle, cut off the bottom and secure it with the neck down over the unscrewed lid above the aquarium so that all the food does not spill out at once. You need to put a cell phone set to vibration mode in the bottle directly into the food. And at a certain time you need to call this phone. As long as the call lasts, so much food will spill out. This method can be used if you need to unexpectedly leave for a while.

A beautiful aquarium with graceful and elegant fish will decorate any room and give aesthetic pleasure to its owners. But sometimes people have difficulty feeding their pets on time. In this case, an automatic aquarium fish feeder will help and relieve you of worries. Let's look at what models pet stores offer customers and how craftsmen can make an automatic feeder with their own hands.

Why do you need an automatic feeder?

In some cases, such a device can become simply irreplaceable.

For example:

• the owner is at work for 12 hours or more;
• a vacation or business trip is coming;
• young fish or a particularly capricious breed of fish requires frequent feeding.

Did you know? In Japan, imperial carps from palace ponds were awarded to those who distinguished themselves as medals. If the recipient fell into disgrace over time, the imperial fish could be taken away.

DIY automatic fish feeder

Let's look at how to assemble an automatic feeder with your own hands using Arduino or any other microcontroller. The device is made of a 5-volt stepper motor 28BYJ-48 in symbiosis with a real-time clock model DS1307.

A homemade feeder has the ability to serve fish food at a given time, dispensing two types of food at the same time.

Tools and materials

You will need:

• plexiglass 5 mm thick (1.5 square meters);
• a bottle of Dichloroethane glue;

Important! The type of glue used for this design has a pronounced chemical odor and harmful fumes, so the glued parts should only be dried in the open air.

• hot glue;
• fine sandpaper;
• cosmetic cotton swabs (for applying glue);
• foil;
• thin knife;
• pencil;
• drill 4 and 8 mm;
• 10 metal bolts with a diameter of 4 mm and 24 nuts of the same diameter (with a margin);
• bolt and nut M6;
• 6 metal bolts and nuts with a diameter of 8 mm;
• metal furniture corner;
• metal pin M6;
• aluminum tube (diameter suitable for M6 stud);
• plexiglass from a CD box;
• electric jigsaw;
• electric drill;
• small bench vise;
• screwdriver;
• hand file.

Step-by-step manufacturing instructions

The procedure for making an automatic feeder is as follows:

1. Part No. 1- made of plexiglass 5 mm thick. Cutting a rectangle using an electric jigsaw. Approximate dimensions of this part: length 7.5 cm, width 4 cm, thickness 5 mm. Markings are made with a pencil on the cut out rectangle. As a result of this marking, the contours of two future through holes in the form of rectangles (length 15 mm, width 10 mm) should be marked in the middle of the part. The distance between these two holes is 15 mm. Using an electric drill(section 8 mm) According to preliminary markings, several through holes are drilled, located nearby, so that after modification with a jigsaw, rectangular holes are obtained in these places, exactly corresponding to the previously drawn contours. Holes are also drilled in the corners of the quadrangular plate for future fastening of the part. The places where drilling will be carried out are moistened with water released from a disposable syringe. The resulting rectangular holes in the center of the plate are processed along the edges with a metal file to smooth out the burrs resulting from working with a drill. Finished part No. 1 is put aside for a while.
2. Part No. 1-a - 6 bars are cut from plexiglass: length 7.5 cm, width 1 cm, thickness 5 mm. The bars are glued together in groups of three using Dichloroethane glue. The glue is applied to the plexiglass plate using a cosmetic cotton swab. As a result, after gluing, you will get two thick rectangular bars, the edges of which must be brought to absolute smoothness using a file and subsequent sanding with sandpaper. For ease of sanding with a file, the glued blocks are placed in a bench vice secured to the edge of the workbench.
3. Part No. 2 - two more strips are cut out of plexiglass: length 15.5 cm, width 1 cm, thickness 5 mm. Between the two resulting strips you need to glue thick rectangular bars prepared earlier (part No. 1-a). Using a cotton swab, Dichloroethane glue is applied to the side of one of the bars and glued to the first strip of plexiglass. A second block is also glued to it, placing it at the other end of the strip. An empty space of 5 mm is formed between the two glued bars. After that, the upper sides of the glued bars are smeared with glue, and a second long strip of plexiglass is applied to them. For high-quality gluing, the structure is clamped in a vice for a time sufficient for the glue to set. To dry, the entire structure is taken out onto the balcony.
4. Using a plate with rectangular holes in the center (part No. 1) as a stencil, mark all its holes with a pencil on a large sheet of plexiglass. After which using a drill with a diameter of 4 mm, drill side holes on a large sheet of plexiglass, corresponding to each corner hole of the stencil plate. Next, a drill with a diameter of 8 mm is used; holes are drilled on a sheet of plexiglass exactly in the middle between the two contours of rectangular through holes. 4 screws of suitable size are inserted into the resulting 4 mm holes and secured tightly with nuts on the back side of the plexiglass. Screw another nut onto the same screws so that there is a distance of 15 mm between the first and second nuts. Part No. 1 is placed on the legs of the screws, in the corners of which special holes are provided for this purpose. To secure it on top of part No. 1, another nut is screwed onto the screws.
5. Part No. 3 - take an M6 bolt and nut and place it in a vice for ease of work. Hot glue is applied to the nut in several layers, turning the bolt during the hardening process. The result is a through fastening, which is necessary for further assembly of the structure; it is connected into one piece with a metal corner. The factory hole in the metal corner is pre-drilled to a diameter of 7 mm. They bring dried part No. 2 from the balcony and attach finished part No. 3 to it using a screwdriver.. An M6 metal pin is inserted into the hole located in part No. 3 (as the future axis of rotation).

Did you know? The Japanese eat fugu fish dishes with pleasure and amazing fearlessness. The liver of this fish contains a deadly poison; the cook only needs to remove the liver not too carefully for the poison to penetrate into the meat. Although, in fairness, it should be noted that only specially trained people with a diploma are allowed to prepare these dishes.

6. A coupling is made from an aluminum tube of suitable diameter. To do this, the tube is clamped in a vice and two holes are drilled through which a metal screw is threaded.
7. Using a screwdriver, nut and bolt, attach the 28BYJ-48 stepper motor to a piece of plywood, a metal furniture corner is attached there. All the structural parts are assembled on plywood and a stop for the stud is made from a bolt secured with a nut.
8. Next, containers for food are made from the lid of a CD box(it is made of rather thin plexiglass). To create one container, 4 plexiglass parts are cut out in the form of truncated cones. There is no bottom in the container. The finished parts are held together using tape or medical adhesive tape. The side edges of the parts (in assembled containers) are coated with Dichloroethane glue; the glue is applied using cosmetic cotton swabs. For drying, the glued containers are taken out onto the balcony. Two feed containers are made.
9. Foil is glued to the underside of the large plexiglass, to which all other parts are subsequently attached. Self-adhesive dark film from a hardware store is glued to the top side of the same plexiglass. In places where there are holes drilled in the plexiglass, the foil and self-adhesive are pierced with a sharp knife. All parts of the feeder are assembled together at the top of a large plexiglass. Containers for fish food are glued to part No. 1 directly above the rectangular through holes using hot glue.
10. The DS1307 real-time clock module is connected to the almost finished design.

Video: how to make an automatic aquarium feeder with your own hands

Which automatic feeder for an aquarium to choose

Modern industry offers a fairly large assortment of automatic feeders for aquarium fish. Each of the models has its own advantages. Here is a description of the most successful and easy-to-use designs.

Juwel

The Juwel EasyFeed automatic food dispenser feeds fish in an aquarium without the presence of the owner, for example during vacation. The device is suitable for all aquariums and can be filled with granulated food.
Juwel EasyFeed allows you to program up to two feedings per day.

The first feed is activated by switching on the feeder and is confirmed by a green LED. At this point, the actual feeding of the fish will take place, and the time will be set to repeat the daily feeding cycle. If immediate feeding is required, it can be activated using the SET button.

The second feeding will take place 6 hours after the first feeding on all subsequent days. For example: activation of the device at 9 am, power supply at 9 am and at 3 pm.

By pressing the M button, manual feeds are always possible. The amount of food can be adjusted manually. You can also connect your Juwel automatic feeder to an air pump to keep your food dry. The template holder (included) has a feeder cover that can be closed while the feeder is not in use and opened when required.
Model features:

• works with batteries, 2xTyp AA;
• up to 2 feedings daily;
• feeding container designed for 30 days (60 servings);
• the serving quantity is adjustable;
• there is a connector for the air pump;
• dimensions: 13 cm x 6.5 cm x 7 cm (length x width x height);
• Suitable for all types of aquariums.

Did you know? Every year, millions of schools of red fish swim into northern rivers to spawn. The fish travels a distance of several thousand kilometers. At the end of spawning, all salmon die, and the young that hatch from the eggs swim back to the sea only to return in the future to their place of birth to spawn and find death there.

Eheim

The Eheim Aquarium 3581 fish feeding device is a single-chamber feeder for aquariums. This device has a 100ml loading chamber, which is mainly suitable for flake and granular products. The dosing hole is very finely adjustable.
At the largest opening, about 1 tablespoon of fish food is dosed. Caution is advised when feeding pelleted food: even the smallest hole will result in quite a large amount of food falling out. The user will need to practice with the hole settings and feed spacing to find the optimal settings.

Even mixing flakes and granulated food is very well received by the feeder and works great. Feed can be fed up to four times a day, with a maximum of 2 feeds (equal to two rotations of the feeding chamber). By simply pressing a button, you can give the fish a “snack” at any time.

The special feature of Eheim aquarium feeders is that the feeding chamber is actively ventilated and there is no sticking or mold of fish food.

Did you know? Pisces also need to sleep to rest. However, fish sleep with their eyes open, since they do not have eyelids. In addition, their sleep differs from humans in other ways: although their heart rate slows down, fish do not have deep sleep stages. This dream is similar to a kind of twilight state, which can be immediately interrupted by the movement of water or the need to escape.

The Eheim aquarium fish device is easy to install and program thanks to its digital timer. The included bracket can be used to attach to open aquariums, including nano aquariums. The device is suitable for all VARILUX aquarium covers. Function keys are splash-proof.

The device runs on batteries, which are included in the purchased kit. It should be noted that the device does not work with rechargeable batteries. The device is well thought out: the warning system indicates a decrease in battery power.

Resun

Convenient feeder for an aquarium during a vacation or business trip. Makes it possible to fill the container with food without disassembling the automatic feeder. It is possible to select 4 different feeding modes within 24 hours, after which the device will automatically serve food to the fish four times a day. The RESUN automatic feeder regularly supplies the fish with food, so the owner can safely enjoy his vacation, everything is in order at home.
The RESUN compact power supply is powered by batteries. Using easy-to-understand programming, the owner decides when to invite the aquarium's inhabitants to the table. By simply pressing a key, you can serve your pets “snacks” at any time.

The display promptly informs the owner that the battery charge has decreased. If the power source is not recharged, then after about 3 days the device automatically turns off. The final shutdown of the motor causes the drum hole to always freeze in the “up” position, so that the rising moist air of the aquarium does not reach the food.

Advantages of this design:

• safe and easy to use;
• has automatic or manual feed;
• simple programming;
• daily feed supply up to 4 times;
• manual feeding (by pressing the button, the feeding process can be started manually at any time).

Did you know? The smallest fish on planet Earth is Paedocypris Progenetica, a member of the carp family. The fish lives in Sumatra, its body length is about 8 millimeters.

Trixie

This automatic fish food dispenser model is ideal for pellets and flakes. Feeding occurs after 12 or 24 hours. The amount of food supplied is automatically regulated, and the fish feed is protected from moisture absorption.
Manual setting is simple and straightforward, the auto-dispenser can be fixed on the lid of the aquarium or on the rim of the tank. The feed container is easy to fill and clean. The device is battery operated.

Features of this design:

• ideal for granules and flakes;
• feeding on 12- or 24-hour rhythms;
• controlled amount of food;
• fish food is protected from moisture;
• feeding (in between programmed meals) through instant manual adjustment;
• convenient to attach to the lid of the aquarium or to the rim of the tank;
• ease of use;
• easy to fill;
• easy to clean;
• Batteries are included.

Did you know? All clownfish are born male. If necessary, the largest male in the flock will turn into a female.

Sitetek pets fish

The device dispenses doses of feed up to 4 times a day. The automatic feeder can be programmed with 9 options for the size of a single serving. The volume and supply of food are flexibly regulated, so the fish will not be hungry or overfed. Keeps food crumbly and dry.
The device can be attached to the aquarium using clamps or suction cups. All operations can be quickly performed on the external control panel with LCD display.

Model features:

• flexible adjustment of serving volume (from 0.75 to 6.75 ml);
• feeder capacity - 215 ml (about 80 g of dry fish food);
• the maximum number of days of automatic feeding is 99, the minimum is 1;
• keeping food dry;
• daily feeding of fish - from 1 to 4 times a day;
• ability to switch to manual feed with automatic reminder;
• warning indicator about low battery charge;
• powered by two AA batteries;
• device dimensions: 150 x 95 x 58 mm.

Important! If the owner of the aquarium leaves home for a long time, then, despite the tank being equipped with an automatic feeder, it is advisable to ask good friends or relatives to visit the fish from time to time to make sure that everything is in order.

Pets in the house limit the freedom of their owners; people cannot be away for a long time, as there is a need to feed those for whom they are responsible on time.

Automatic fish feeders give people the opportunity to leave home for a few days and not have to worry about leaving their pets hungry. Only the owner of the aquarium can decide whether to buy one of the automatic feeders offered by the industry or make the desired design with his own hands.

Good day, today is my review of the “Zoomir” aquarium feeder.

With the advent of the aquarium house, already at a conscious age you learn about new products that, for example, did not exist during my childhood, when simple guppies lived in my house in a 5-liter jar. There were no such feeders at that time, or I simply didn’t know about them. And now, about 20 years later, this is the third aquarium in my life. First, remember about the jar with guppy, then the Cockerel fish in a 10 liter aquarium, and now a 100 liter aquarium with 2 goldfish.

Here is the actual background to the review of the fish feeder. At the pet store I purchased the simplest feeder for aquarium fish from the manufacturer “Zoomir”.

On the back of the package there is a directions for use. That the feeder is designed for both dry and live food.

The feeder itself consists of a suction cup for attaching to the wall of the aquarium, a food container and a grid. I would like to note that the suction cup holds well, this is at an inexpensive price for the feeder; when I bought it, I was afraid that the feeder would not hold at all. BUT she is holding up WELL!

Here is the feeder itself without the contents. I installed it in a familiar place where I had previously fed my fish, so that it would be easier for them to navigate. Where there are no aquarium plants below, it is more convenient for me to maintain cleanliness and order in the aquarium. Because in addition to dry food, fish eat porridge, peas, nettles and much more. BUT this is feeding goldfish for up to six months, so that they grow into big FISH)) Before feeding your fish, read the tips. For example, if peas are canned, they must be separated from the skins and crushed.

The grid in the set is for feeding with live food, but you can feed dry food without a grid. I will demonstrate the feeder in both versions. The manufacturer recommends using a grid for feeding live food. To feed dry food, remove the grille. But I also leave the grill when feeding dry food, since this time I bought flake food, and for goldfish it is better to soak them for feeding.

I just pour the food onto the grate and when it gets wet, it just starts pouring out through the grate. The fish have already gotten used to the feeder within a week and they themselves rub their noses at it so that the food falls out faster.

And a feeder without a net. If you set it at the right level. Further in the photo, the food remains inside and does not scatter throughout the aquarium.

The feeder turned out to be a useful acquisition. The food is concentrated in one place, but this is the simplest feeder, I can’t say about other options for feeders, since I have little experience in aquarium keeping and I’m just learning, I hope my experience was useful to you.

No matter how I tried to photograph the process of feeding the fish, I was unable to focus the frame well.

Thank you for your attention and happy shopping!

Show phone

� Bestfish24 - private fish farm, 190 species of fish �
1) Automatic feeder EHEIM 3581 with batteries 38450r
High-quality and reliable programmable automatic feeder, with electronic control. A 100 ml container is enough for three to four weeks of using the automatic feeder.
- easy, understandable programming. Possibility to set up to 8 feedings per day.
- the emergency system of the automatic feeder promptly warns of low batteries
- volume 100 ml
- function buttons are splash-proof
- batteries included
- glass mount included
- built-in feed ventilation from humidity
2)4) Automatic feeder JBL AutoFood BLACK, black and white 3500 RUR
-Attractive black design with clear details.
-The 125ml capacity can be increased to 375ml using a 250ml feed container.
-Suitable for any feed with granule size up to 3 mm.
-Guaranteed operation from AA batteries (3 x 1.5 V AA).
-With air supply for drying food.
-Easy to program, up to 4 feedings per day.
-Universal mounting options using suction cups or a clamp, the feeder can rotate 360°.
-Dimensions: length 18 cm, height 8.5 cm (without fasteners and dispenser); height without fasteners, but with dispenser - 18.5 cm; height with suction cups - 9 cm.
-Fastening with a clamp is suitable for lids and glass up to 28 mm thick.
-The size of the feed supply hole is 27 mm x 20 mm.
-Battery charge is shown on the display
-3 year warranty.
3) Automatic feeder EHEIM TWIN 3582 with batteries 5100r
Automatic feeder with a large feed compartment (160 ml), which will allow you to feed your fish for a long time. Two separate containers in which you can put different types of food. The most advanced and perfect of all automatic feeders on the market.
- Convenient, spiral-shaped augers leave no dead zones for the feed.
- Easy, electronic programming of the Eheim automatic feeder, allows you to set each feed compartment for a different time
- Powered by 4 AA batteries (included)
5) Automatic fish feeder JUWEL Futterautomat 89000 1815 RUR
-The JUWEL automatic feeder can be easily used in any aquarium. The special mounting panel makes the use of these feeders in JUWEL aquariums extremely simple and convenient.
-It can be programmed for two feeding cycles per day and allows you to feed your fish at 6 hour intervals. The volume of the feeding dispenser is designed for approximately 60 times. Pelleted feed is particularly suitable for use in automatic feeders.
-For conditions of high air humidity, ventilation of the drum of the JUWEL automatic feeder is provided using a standard air pump.
6) Automatic feeder Tetra myFeed 2250 RUR
7) Automatic feeder Hydor Ekomixo 1930r
8) Automatic feeder Hydor Mixo 2285p
9) Sera 1660p auto feeder
10) Automatic feeder Prime 1350p
11) Automatic feeder Aqua Pro FS 3025 is out of stock
12) Automatic feeder Hailea FT 1400p
13) Automatic feeder Hagen A 10780 2260p
14) Automatic feeder Hagen A 10785 3930p