Fishing crafts for summer fishing. Homemade gear for winter fishing Do-it-yourself winter gear homemade

Despite the rich assortment of tackle for any season in fishing shops, fans of ice fishing do not stop inventing homemade winter rods. The main reason lies not in the desire to save money, although this factor is also present. For most domestic anglers, only homemade products can provide preferences both in terms of convenience and efficiency. And for many residents of remote areas, due to the lack of specialized stores, the manufacture of fishing tackle is a common thing.

Winter tackle is compact and simple, because ice fishing requires the presence of an angler right at the hole. Thanks to this, there is a wide scope for creativity and new inventions. What kind of rods do anglers make for ice fishing?

All homemade fishing rods for winter fishing can be divided into several categories according to the method of fishing. Ice fishing is a multifaceted hobby of millions of Russians, everyone finds their favorite niche.

Fans of elegant fishing for white fish and perch use float fishing rods. They are equipped with a nozzle mormyshka or ordinary hooks with a sinker. For these anglers, the rod must have a stable position on the ice, and a supply of line can be stored on a small reel or on the tackle handle. A striking example of such homemade is a filly fishing rod, which owes its name to its resemblance to a horse. Most often it is a nodding rod for stationary fishing.
Another category of fishermen prefers to actively fish with a reelless mormyshka. With this method of fishing, the fishing rod is in the hands of the whole fishing, it rises up and down, the angler gives the jig trembling and oscillating movements. So that the hand does not get tired, the revolver is made light and comfortable. Many options have been invented where the handle is made of cork or foam, but the nod plays the main role.

To catch a predator on a balancer and a lure, anglers make the longest fishing rods. Sheer lure consists in tossing artificial bait over the bottom, where it should tempt the predator to bite. Therefore, the whip is made long and rigid, it is equipped with an elastic guard, and the handle can be made of wood or foam. It is important that the hands are warm and comfortable to hold the tackle.
Postavushki are considered gear for passive fishing of such fish species as perch, pike perch, trout, rotan. A live bait or other bait clings to the hook, the equipment is lowered into the hole, and the fishing rod is set in a vertical position with a slight slope towards the hole. A bite is determined by a bright gatehouse. Usually, several posts are installed, and the angler takes such a position to clearly see all the gear (read more about choosing a live bait for fishing in our article).

Materials for creating winter fishing rods

The main elements of tackle for ice fishing are the handle and the whip. They can be made from different materials. Before you make a winter fishing rod at home, you should choose the most suitable options for yourself.

What is the whip made of?

The whip has a serious responsibility for the quality of the wiring and the effectiveness of the strike. Therefore, this homemade element must be optimal in length and rigidity. Manufacturers of budget fishing products usually use materials such as polypropylene or polystyrene. They quickly deform or break.

A good polymer for making a whip is fiberglass. It is suitable for most types of winter fishing rods.
When you want to break through the hard mouth of a pike or walleye, it is better to use a carbon fiber whip.
Juniper has long been a traditional material for the manufacture of a whip. Even now, some anglers successfully use it on their fishing rods.

As for the length of the whip, for jig tackle it is limited to 20-30 cm, lure use longer elements (50-70 cm).

Handle materials

One of the main requirements for the handle is convenience, lightness and comfort. But it must be hard enough to securely fasten the whip.

Our grandfathers made pens mainly from wood. It is pleasant to hold even with a bare hand, it is well processed and durable.
Today, wood has been replaced by such modern materials as cork, dense foam, polystyrene foam. They have lightness and buoyancy, are well processed, do not freeze over.

The best homemade products for winter fishing, manufacturing examples

A lot of homemade products have been invented, which differ in the complexity of manufacturing, weight, and cost. Every fan of ice fishing wants their own ice fishing gear to be simple, affordable and effective. Therefore, we will dwell on several options that any angler can implement.

Create a rewinder for 10-15 minutes

The use of such non-attached mormyshkas as “devil”, goat”, “uralka” or “nymph” allows you to catch roach, bream or perch without planting a small bloodworm in the cold. But to give these lures a believable action, a light and sensitive rod is required. It can be done in 10-15 minutes if you prepare all the necessary details in advance.

Helpful advice! It is necessary to make a small groove on the handle so that the fishing line does not fly off the rod on its own. This can be done with a clerical knife and sandpaper.

A transverse through hole is drilled about 1 cm from the edge. Its diameter depends on the thickness of the whip.
A plastic rod, a lollipop tube, the tip of an old telescopic rod, etc., are suitable for the role of a whip.
Photo 2. A whip made from a plastic knitting needle for a children's umbrella.
Photo 3. The whip is inserted into the cork-handle.
A nod from a PET bottle or X-ray film is mounted to the whip using cambric. Another piece of insulation is glued on top to pass the fishing line. A hole is made at the end of the nod or cambric is glued.
Photo 4. Film nod.
It remains to set up the work of the tackle by winding the fishing line 0.08-0.12 mm and tying the mormyshka. The approximate weight of such a fishing rod will be 10-20 g. Due to the simplicity and cheapness of manufacturing, you can make several different models for existing mormyshkas.

How to "saddle" a filly?

The unusual name of this winter fishing rod attracts the interest of beginner anglers. Filly is the common name for a whole range of float fishing tackle that has an unusual handle shape. It allows not only to hold the whip and store a supply of fishing line, but also to give the rod a stable position on the ice.

The most time-consuming and difficult task in the manufacture of filly will be cutting out the handle. The material is solid foam. Processing is carried out using a clerical knife, file, sandpaper. In the classic version, a protrusion for winding the fishing line should turn out at the top of the handle, and two wide legs at the bottom. In the end part, a longitudinal hole is made to a depth of 20-30 mm for a whip.
The role of a whip can be performed by a standard purchased product, the tip of an old spinning rod, feeder, or just a juniper twig.
A nod is given in case the angler has to move away from the hole or wants to play a little with the bait in the upper layers of the water. For this purpose, a gatehouse made of a PET bottle, an X-ray or a steel plate is suitable. A high-voltage automobile wire or several tubes are used as a holder.

The advantage of the filly is a high degree of buoyancy. Even having missed a bite, the angler does not lose his tackle. The handle will play the role of a rescue buoy.

Making tackle for lure

A good catch of pike, perch or zander can provide the angler with a homemade fishing rod. Sheer fishing involves constant vertical play with artificial bait. It is performed in different water horizons, so it is better to equip the product with a coil. For a complete set, you can use a simple inertial model made of plastic, a small meat grinder or a modern multiplier.

One of the main requirements for a lure is the stiffness of the whip. It is better to make it from a feeder quiver tip or the tip of a spinning rod 50-70 cm long. This is especially important when fishing for pike and pike.
The handle can be cut from moisture-resistant wood or plastic products can be used, covering them with a layer of cork. To do this, the cork is crushed and glued to the handle. Usually several layers are applied, after the glue has completely dried, rough abrasive processing and subsequent grinding are performed.

The coil is attached to the handle with the help of clamps and electrical tape.
The lure can be additionally equipped with a nod if the whip is hard, and the baubles and balancers are light. It can be made of wire spring, steel or lavsan plate. For mounting on a whip, it is better to use special holders.

Photo 5. Fishing rod from improvised materials.

When the angler wondered how to make a fishing rod for winter fishing, you should immediately pay attention to the materials at hand. Many fishing masterpieces are made from unnecessary items. At the same time, fishing rods are distinguished by convenience and high catchability.

Chub

Do it yourself

In this article we will talk about how you can make a fishing rod for winter lure with your own hands. Someone will ask: “Why, because everything has been ready in stores for a long time?”, But since you have come to this article, it means that you need it and are interested. Not everyone is too lazy to make tackle on their own, someone likes it, but someone may simply not have it..

Perch

Do you want to learn how to make spinners for pike and perch with your own hands? Well, someone likes to buy beautiful baubles in fishing shops, keep track of new releases and add to their collections. Expensive purchased spinners, for the most part, have good catchability, and some of them are really very catchy. Here are examples of such spinners for perch and pike. But k..

Winter fishing

Since you have landed on this article of the website site, it means that you have decided not to buy a fishing rod for winter fishing, but to make it yourself. Well, good idea! Making gear with your own hands is very exciting and, by the way, profitable! Someone does not understand why make a winter fishing rod yourself, if you can just go to a fishing store and choose it ..

Winter fishing

Many anglers who have sufficient fishing experience have gotten used to making many fishing tackle and lures with their own hands. I strongly do not recommend starting with the use of homemade baits for a beginner for several reasons. The main ones are: If you are a beginner, you do not know how the bait should work when catching a particular fish and you can make mistakes in manufacturing, ..

Cupid white

Who doesn't want to catch white carp? Every fisherman dreams of having this handsome man in his catch. Some succeed, and some still have not been lucky with the catch. In this article I will tell you how to increase the chances of catching grass carp or catching your first trophy. To do this, we just need to prepare the right bait.

Do it yourself

Bombarda or sbirulino, as it is also called, has Italian roots. It is a weighted float that allows you to make long casts of light bait and catch almost any horizon of the reservoir. Bombards can be divided into 3 types: floating; neutral; sinking. The float of a floating bombard remains on the surface of the water after casting and does not sink. The float of the neutral bombard begins to slowly sink under..

Do it yourself

Bait for fishing is always necessary. If you fish without using fish bait, then be aware that you are losing most of the fish that could have been caught. Purchased bait is good, but expensive. But if you learn how to make bait for fishing with your own hands, you can easily make it at home. Such bait will cost you less, ..

carp

Hand-made bait for crucian carp is a great way to provide yourself with a good catch. The crucian is very fond of baited places. You have probably noticed how the lack of bite of this peaceful fish is easily corrected by throwing a small amount of bait to the point of catching. So, crucian carp responds well to almost any bait, but there are cheaper options than store-bought ones and much more..

Do it yourself

Pike fishing continues in winter, anglers put spinning rods in the pantry and pick up winter rods and vents. But this article deals specifically with catching pike with winter rods, or rather, about the bait itself - spinners. What spinners to catch pike in winter is the main topic of this article, and we'll talk about that. In the arsenal of the angler should always be..

Do it yourself

Many anglers catch or want to try to fish with this type of tackle as a vent. Zherlitsa is a very effective fishing tackle, which is caught passively, that is, without the direct participation of the fisherman. The device of this tackle is elementary, so it is very simple to make a vent yourself. In this article, we'll show you how to make a do-it-yourself chimney. By the way, I would like to point out...

Do it yourself

A marker float is an indispensable thing when it is necessary to mark the place of fishing, when fishing with a feeder. By installing it at a specific point in the reservoir, you will not be mistaken with casting tackle. Typically, a marker float indicates depressions, pits, or simply baited places. After all, you will agree that if you throw tackle exactly at a baited place, then the chances of catching a catch increase significantly. ..

Do it yourself

Many anglers prefer homemade floats to store-bought floats and want to learn how to make their own floats rather than buying them from the store. The floats can be made in any shape that you like, as well as painted in your favorite color that will please your eye while fishing or which seems less noticeable to the eyes of the fish. This article will tell..

Do it yourself

Why is boilie better? Boyle is a modern bait that is used for catching cyprinid fish species, mainly for catching carp and carp. Why is boilie a priority when there are many more affordable and natural baits? Because the boilie, unlike the worm, pearl barley or dough, is designed exclusively for large fish. The larger..

DIY or DIY fishing tackle

Why buy what you can make yourself? Do-it-yourself fishing tackle is a hobby of many anglers. No, this does not mean at all that it is not possible to buy a float, feeder or other piece of equipment. Many fishermen have the money to buy the best gear, but still prefer to make some parts themselves. Who is just out of interest, and who, because he manages to make the most suitable option for himself.

Regular addition of new articles will allow you to learn something new every time and try to do it yourself. You will learn how to make floats, spinners, mormyshkas, marker floats and much more.

Experienced anglers are sure of success at any time of the year if do-it-yourself fishing gear was previously made, taking into account the characteristics of fishing, the type of reservoir and many other factors. There are many secrets of self-creation of fishing tackle with your own hands. But you can pay attention to the most popular methods that can be used even by beginners.

The secrets of creating tackle for carp

Carp is one of the common inhabitants of the water bodies of central Russia. On the territory of many regions there are fishing farms with carp ponds and lakes for paid fishing. But even in the case of a trip to their well-maintained shore, an experienced angler will definitely take with him equipment made by himself. These homemade fishing gear often become a more reliable guarantee of getting a big catch than the best examples of tackle from leading manufacturers.

When performing such “crafts”, the simplest items that are present in any private household are used. For example, each connoisseur takes a cunning and cautious carp with him for fishing. self-created balalaika (putavushu). To make it you will need to take:

When assembling such fishing tackle with your own hands, the foam is used as a "beacon" showing the place where the tackle is thrown. A fishing line of the required length is attached to it with the help of electrical tape and nylon thread. A sinker is attached to its opposite end. On a sufficiently long leash, a hook is attached.

In the ideal case, fishing homemade products installed in several places are used. The length of the fishing line and the weight of the load is determined depending on the characteristics of the channel and the bottom of the reservoir, currents and other factors.

When going out to catch carp, various baits can be used. Experienced anglers call one of the most convenient among them soaked peas. The plastic retainer will allow you to control the bite.

Homemade fishing for carp

Another inhabitant of the underwater depths, popular with fans of quiet hunting with a fishing rod, is carp. Simple fishing crafts made from available materials will help to outwit and catch it. The easiest option to perform is a float tackle.

For manufacturing you will need to take:

The finished structure is assembled in a few minutes. All its components must be connected with maximum strength. The weight of a carp usually reaches 4 kg or more. This strong inhabitant of the underwater depths can easily get off the hook or break the tackle.

In reservoirs with a calm current, it can be installed bottom gear option. You can even use the “snack” known to everyone since childhood, which has become the prototype of the feeder that is popular today. To perform this option, you will need a strong rod, a fishing line, the length of which can reach 100 m, a float and several hooks at once. It is most convenient to use a bell as a bite signaling device. Such homemade products help the fisherman to become the owner of a significant catch and, without being constantly on the shore, control the gear.

Features of the manufacture of gear for winter fishing

Such types of gear are convenient just for fishing in the cold season. In most cases, homemade products for winter fishing provide the fisherman with the opportunity to move away from the place of quiet hunting and control bites due to the sound of a bell fixed on the surface of the water or a hole in the ice.

Many fishing homemade products become a great addition to professional devices. For example, it is popular to manufacture additional elements based on the familiar to everyone ballpoint pen. Such devices will help improve spinners and mormyshkas.

For manufacturing, empty rods of various colors are used. They are cut into rings and attached to underwater gear. Such decor will attract the attention of potential prey. In the winter season, it will additionally draw attention to itself, allowing underwater inhabitants to assume the opportunity to feast on small fry rare in winter.

In the cold season, many familiar items come to the aid of the angler:

Numerous homemade products for winter fishing are made by hand to ensure comfortable fishing from the shore or from the ice next to the hole. Such additions are interesting to make on your own.

In conclusion, it is only worth recalling how pleasant this option for spending leisure time in nature is to every fisherman. The preparatory stage for choosing homemade gear turns fishing into an even more interesting hobby. The implementation of tackle is available to every beginner.

Making fishing gear with your own hands, as well as catching fish itself, is an exciting process. Professional fishermen improve their skills, creating high-quality tackle that increases the catch tenfold. A variety of techniques are used for this. All available tools for fishing will always be individual and unique, since do-it-yourself fishing tackle is a purely creative process.

Materials needed for work

Wood (planks or bars). Wobblers or poppers can be cut out of it.
Metal plates - suitable for the petals of spinners.
Various wires to create bindings and rings for our lures.

Frequently used tools

hammer;
saw;
sandpaper;
file;
primer;
paints;

Making wobblers

To make a wobbler with your own hands, hardwood 5 cm long is used in the form of an oval, narrowed on one side.

To begin with, we get a blank by sawing off a 1.5 cm bar from the main board.
On the bar we draw the outline of the future wobbler fish with a pencil, after which all the excess is gradually cut off with a knife.
In the front part, as shown in the figure, we first mark with a pencil, then we cut out the cavity for the future blade.
The belly is also sawn along the entire length of the wobbler, where we will insert the mount, which is made of wire, as shown in the figure.
1. It is desirable to use a wire made of stainless steel. 2. If you do not want to use rings for fastening tees, take care of inserting them before twisting the wire into rings.
We insert the wire mount, pouring epoxy glue.
The wobbler is covered with waterproof varnish, and after drying, tees are hung on it.
To select the level of buoyancy, lead weights are used, which are attached to the openings of the abdomen between two loops: nasal and abdominal. Then the wobbler can be sanded and varnished so that its body does not absorb water.
With the help of thin and soft aluminum, a blade is created from under the cans for drinks, which is glued into the wobbler.

Production of oscillating baubles (oscillators)

Oscillating baubles or spoon lures can also be made by hand.

For their manufacture use:

cruciform hammer with balls at the ends with a metal handle;
wooden boards with a recess in the form of a spoon;
rubberized steel shaft for "rolling" part of the product;
metal ball;
drill and drills;
hacksaw for metal;
steel stylus.

How to make a oscillating petal:

On cardboard, create the desired fixture template.
Draw a contour with a stylus on a sheet of metal with a given thickness of 1.5 mm.
Then the sheet is clamped, and the template is cut out with a hacksaw.
The workpiece is fixed in the recess of the board, beaten off with a hammer, rolled to strengthen one of the sides of the spinner.
They fix it with a hammer.
Remove uneven edges and create holes for factory-type rings.

spinners

Wire. You need a spinner frame based on hard-type stainless steel wire with a length of at least 100 mm. Diameter - 0.8 mm. The curved shape of the wire is straightened with pliers, slings and chocks.

Petal. Aluminum from 0.33 l cans can be used as a petal. You can even cut a petal with scissors, aluminum is very soft. Holes for inserting the petal onto the main wire are made with a thick needle in conjunction with pliers.

Construction assembly

A ring is created at one end of the wire by bending the end of the wire with pliers.
Then the bead is put on.
Then a petal.
Then another bead.

If you want to make your lure heavier for fishing at depth, use a longer wire and insert a sinker with a hole between steps 4 and 5.

5. A tee is inserted and a ring is created in which this very tee will be. Or you can use small rings, for example, to change the tee to the front sight.

Homemade castmaster

Castmaster is made independently on the basis of a metal hollow tube with a cross section of 16 mm (for example, a spout from a faucet mixer) and lead. As improvised tools, a hacksaw, a drill, a drill (D 2.5 or 3 mm), a flat file, a vice and a caliper are used, including the original castmaster model.

The vise is clamped into the pipe, the workpiece is sawn off, the cut angle is made as in the original castmaster and measurements. Holes are drilled exactly in the middle at the ends of the workpiece, and on the inside it is tinned so that the lead does not fly out during fishing. The holes are sealed with masking tape, after which the workpiece is placed on a flat surface to dry, the remaining gaps are covered with molten tin using an electric soldering iron. If necessary, they are processed with sandpaper and lead is drilled through the holes on the metal tube.

Balancer for winter fishing or plumb fishing

A homemade balancer is a voluminous bait in the form of a real fish. It is created on the basis of alloys and low-melting metal. Hooks are placed in the head or tail of the fish, pointing the sharp end up. The back and abdomen have two loops. One for attaching to a fishing line, the other for a threesome.

Foam in the shape of a fish

Homemade bait foam rubber fish of domestic know-how. Household sponges of various colors are required. Before processing, moisten and squeeze. With the help of a blade, the necessary bar of a certain shape is cut off - in the form of a fish 3-8 cm in size. Then it is painted with waterproof markers, or not painted, now you can buy sponges for every taste and color in stores.

The jig head is attached without the intervention of glue. And if you want to fix a tee in the fish, you need to make a small incision - insert the tee and seal it with waterproof glue.

Making mormyshkas with your own hands

Homemade jigs are made using casting (lead, lead-tin alloys), soldering (tin and lead-containing alloys), tooling (tungsten). The last method at home cannot be used.

A form is needed, which can be made from gypsum poured into matchboxes, and put a mormyshka in the center. After the gypsum has dried, remove the mormyshka, clean it of irregularities and cut channels for supplying tin to the hollow area for the future mormyshka.

It must be remembered that lead is a toxic alloy and it is better to melt in nature or in a special mask so as not to inhale fumes.

Homemade sinkers

Sinkers are cast by analogy with a mormyshka. A form for pouring lead is required.

It is made from a large sinker, into which a ring with a small notch is soldered, as shown in the figure. Such an incision will allow you to insert the fishing line of your tackle without breaking the tackle. And it is advisable to use a strong fishing line for the retriever, you can use a braided cord, or a nylon thread.

Electronic bite alarms

To create a home-made electronic bite signaling device, you need electronic and bite signaling devices (in the form of a bright plastic barrel with a latch) that have a rod mount and a bicycle spoke. A needle is attached to the signaling device roller, and a barrel is fixed on it on the other side. The specified design is attached to the rod stand.

Artificial baits (baits)

For fishing with a float rod, artificial baits imitating a worm, maggot are sometimes used. Such baits should smell appropriate, so take care to wet the bait with a very small amount of flavoring. For example: garlic drops, anise, vanilla.

When there are no attachments for fishing, professional fishermen use artificial baits:

wet and dry flies based on wool, feathers, colored threads;
bugs based on cork or foam;
"goat beard".

Summing up

In the manufacture of fishing tackle, you can use any handy means. And there can be a great many variations of baits and rigs. It is not at all necessary to do as others do and as described in the manuals. The main thing is to understand what the final product is like, and then come up with an alternative solution for making a similar bait.

Here, on one page, fishing homemade products from simple materials are collected. The video shows the manufacture and main characteristics, the catchability is checked in the conditions of a reservoir. There is no doubt that the catch will increase significantly if these little tricks are applied to your fishing practice.

We advise you to take a closer look at the invention of Sergey Makarov's homemade fishing. This is a lollipop stick. In practice, it turned out that this is a great extractor. The meaning of manufacturing lies in one manipulation. At the beginning of the tube we make a small gap with a hacksaw for metal. Extractor is almost ready. What is it for? On fishing, especially in the spring, the fish are actively behaving. Use small hooks, get some problems. The hook goes very deep. You have to do manipulations with the fish, which neither you nor the fish give pleasure. And this little homemade tool helps out. The line starts to cut. Slightly turns in so that there is no reverse. Deepens, puts on the shank of the hook, pushes out. In this way, the hook is easily released. In another article - a store option.

Mormyshka ant - fishing homemade

Recommendation from personal experience. The gatehouse used by the angler Igor Kazantsev is made of a spring. For himself, chooses bright colors, such as yellow or green. Especially in cloudy weather it is good when the color is yellow. He is visible in the hole. Less irritating to the retina. We use the line ten. A few words about mormyshka, which is available in the review. This is a classic executed ant. This fishing homemade product belongs to the category of universal nozzles. You can fish on it as we look, and without it. You need to be properly built mormyshka configuration. For her to play. There are those that look like ants. Especially in its form. But there is one remark: the hole into which the fishing line enters is made from the very top of the ant. This lends the game needed for this class of jig. Why can this tackle be without attachment? Putting a yellow bead or another cambric of the same color on it, for a perch that often pecks at a reelless mormyshka, this combination is an irritant. He can't resist taking a mormyshka.

Another fishing homemade: perch tackle

Let's imagine such a situation. You are on a boat. Depth approximately 1.5 meters. Around overgrown with grass, as usual, with windows and corridors. You have a complete feeling that perch is grazing in this grass. It was in such a situation that the angler visited. I was not mistaken in my premonitions, the perch was there, but it is almost impossible to catch on spinning. For five casts, four hooks. It is impossible to drag a lure through the grass. He returned home and invented a new tackle. When he appeared for the second time in these lands, he caught 4.7 kg of perch in these lands. Let's try to collect it.

What you need for this, you will see in the course of manufacturing by hand. This operation is simple and everyone knows. After casting, the workpiece is processed with a hammer and a file, and acquires a marketable appearance. Of course, you can buy a jig head, but in this case, where to put unnecessary hooks and, most importantly, free time. Now we cut out the back of the captivity and give it the appearance of a fry. A fish glued on a hook can be coated with nail polish. If you want to make the tackle durable, epoxy coating. The final touch is the fastening of the spinner. A small yellow petal, together with a supporting bead, is attached to the fishing line. We pierce the tackle and tie the fishing line to the hook. Look at the video, how the finished tackle behaves on a perch in the water.

Making a homemade balancer by hand

I decided to start making a balancer at home as an experiment. Went the easy way. As a basis for production, I took the classic version of a winter lure for perch fishing. On this basis, I made something similar, outwardly somewhat different from the traditional balancers used for fishing. Judging by the test, the effect was. The last word always belongs to the fish in determining the quality of the bait. During testing received a combination of many weather conditions unsuitable for optimal fishing. As a result, a very sluggish bite. But this bait brought a few fish. There is hope that more will come.

At the base is an ordinary perch lure. I filled it with solder not very much in order to achieve the planning properties of the lower part of the fishing catchy homemade product. Rigidly put hooks on both sides. I did not put the tail, as is used in most balancers. Made it easier. Rigid propylene brush, giving the ability to plan. Added some red wool. Fasteners: I made a bandage and smeared it with glue, making a movable mount. Possible options in size and some details. The most interesting thing is that the fisherman came to the conclusion that almost all spinners for vertical fishing become horizontal with a small operation. The only caveat: round-shaped spinners are not suitable for conversion into horizontal ones. They have a certain mass and weakly expressed properties for planning. This is necessary for the horizontal movement of the spinner. We must first find the center of gravity. Make a mark. They made a hole through. To fix the loop, the master went a little further. In place of attachment of the fishing line in the traditional form of spinners in this model, put a hanging double. It acts as a tail.

Fishing homemade - fishing rod for rudd

What should weary spinners do when they are not very lucky? There is a lifesaver. This has been used by fishermen for many years. Regular fishing takes place in wetlands. That is, herbs, reeds. Rudd and other fish that are present in such reservoirs are caught. This is a rather primitive homemade fisherman. Any mormyshka in color and shape is used. The most important thing is to have a long fore-end. There is a second production option. It is desirable that the float does not have an antenna. Fishing takes place directly in the thick of grass. When playing fish, the antenna often catches the grass. Sometimes even tackle is lost. The float is preferably dim. Fishing occurs with a depth of 20-40 cm.

Where is the best place to catch rudd? On the bays, there is a wall of reeds and clean water closely adjoins it. Depth of one or more meters. She doesn't change. It is advisable to throw the mormyshka as tightly as possible to the wall of the reeds. Bites are such that the float is not heated, since the fish is riding. As a nozzle, it is better to use maggots. It sits more securely on the hook, while the worm constantly breaks off.